DIY 1W WisMesh Booster Solar Node
DIY 1W WisMesh Booster Meshtastic / MeshCore Solar Node
Follow the complete video and parts list to build a dual-panel, 1W solar node for long-range off-grid mesh communications.
Download the STL files · Buy a complete assembled node
Link To Build Video
🔧 Parts List
***(Affiliate Links do not cost you more but I do get a small commission from amazon. Your support is greatly appreciated!)***
-
QILIPSU Waterproof Junction Box (IP67 Outdoor Enclosure)
https://amzn.to/4tcPtTq -
Waveshare Solar Power Manager (with 3×18650 holder)
https://urlgeni.us/amazon/4GkK5z -
Solar Panels
https://urlgeni.us/amazon/7SMWJ9 -
Cable Glands
https://urlgeni.us/amazon/7l_pbB -
U.FL to N-Type Female Coaxial Cable (RG178, 4"/10cm)
https://urlgeni.us/amazon/tiBolv -
5.8dBi LoRa 915MHz Fiberglass Antenna
https://urlgeni.us/amazon/h8Bl8I -
5.8dBi LoRa Antenna (Black Option)
https://urlgeni.us/amazon/xXxjjE -
8dBi WiFi RP-SMA Antenna (2.4GHz)
https://urlgeni.us/amazon/_QddPV -
Breather Valve
https://urlgeni.us/amazon/1Et4nb -
1W WisMesh Booster (RAK3401)
https://store.rakwireless.com/products/meshtastic-1w-lora-booster-kit-rak3401?ref=ComeOnMacGyver
-
USB-C Charging Port
https://urlgeni.us/amazon/7lQJmW -
Right Angle USB-C Cable
https://urlgeni.us/amazon/HUVW9 -
RAK1906 Environment Sensor (BME680)
https://store.rokland.com/products/rak-wireless-rak1906-wisblock-environment-sensor-bosch-bme680 -
Samsung 35E 18650 Battery (3500mAh)
www.IMRBatteries.com -
USB-C Panel Mount
https://www.amazon.com/dp/B09Y4FX1HK -
Locking Push Button Switch
https://urlgeni.us/amazon/xFPq6U -
Waterproof Latching Push Button Switch (5 Pack)
https://www.amazon.com/dp/B0C2GBN5MX -
Hose Clamps
https://urlgeni.us/amazon/7kl1Vq
🛠️ Tools & Misc
-
Step Drill Bit
https://urlgeni.us/amazon/HwOsXk -
Soldering Iron
https://urlgeni.us/amazon/hBT2XU -
Heat Set Insert Tool
https://urlgeni.us/amazon/uld5aK -
Standoffs
https://urlgeni.us/amazon/wGlQqy -
Threaded Insert Set
https://urlgeni.us/amazon/20B1OD -
Screw Set
https://urlgeni.us/amazon/gVERnK -
M.2 Screw Set
https://urlgeni.us/amazon/fEHTq5 -
Heat Shrink Tubing
https://urlgeni.us/amazon/9MaqsV -
Gorilla Clear Grip Adhesive
https://urlgeni.us/amazon/9QrdGC
Frequently Asked Questions
Can I use Meshtastic or MeshCore?
Yes. The hardware can be configured for either platform; follow the applicable firmware instructions for your chosen device.
Which solar-panel mount should I choose?
Check whether your panel has a square or curved backplate before ordering or printing. See the solar-panel backplate guide.
Where can I get the printable files?
The 1W WisMesh STL package includes the printable mounts and internal plates used in this build.